BenQ MW853UST+ Manual do Utilizador descarregar pdf (Página 71)

Maintenance 71

10. Restart the projector.

Do not turn the power on with the lamp cover removed.

Resetting the lamp timer

11. After the startup logo, open the On-Screen Display (OSD) menu. Go to

the SYSTEM SETUP: Advanced > Lamp Settings menu. Press

MODE/ENTER. The Lamp Settings page displays. Highlight Reset

lamp timer. A warning message displays asking if you want to reset the

lamp timer. Highlight Reset and press MODE/ENTER. The lamp time

will be reset to '0'.

Do not reset if the lamp is not new or replaced as this could cause damage.

7. Tighten the screws that secure

the lamp.

8. Ensure the handle is fully laid flat

and locked in place.

• Loose screw may cause a bad

connection, which could result in

malfunction.

• Do not over tighten the screw.

9. Replace the lamp compartment

cover on the projector and

tighten the screw.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 82 83

Sem comentários

BenQ MW853UST+ Manual do Utilizador Página 71